How to install the Guanda Star Cloth Wardrobe
[ Chinese wardrobe net ] When we buy furniture, we must buy a wardrobe , because we usually do not wear more clothes, so we need a wardrobe to help us store clothes. Among the many types of wardrobes, the cloth wardrobe is the simplest wardrobe, and the installation method is very simple. So how to install the cloth wardrobe of the Guandaxing brand?
Guanda Star Cloth Wardrobe
Guanda Star Cloth Wardrobe Installation? Guanda Star Cloth Wardrobe Installation Steps
1. Check the packaging. First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged. If there is, it is likely that the steel pipe inside is also crushed. Such goods must not be signed and purchased. Check it out clearly.
2. Check the accessories. Open the package, and then check whether the accessories inside are complete. There is a manual, check the instructions. If there are few, it is estimated that you can't install it without using it. Therefore, the number of advances is clear, so as not to be wasted. When installing, be sure to wear gloves. And must carefully read the instructions.
3, the first to install the bottom. First install the bottom one, take out the four-way joint with the bottom and the high, and connect with the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, decide the position of the place, and install the long tube. Short tube. Then install the base fabric on both sides, and then install a three-way joint around each other.
4, set of wardrobe cloth sets. After installing the bottom, insert six short steel pipes, then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of the bottom plate and then put it on the six steel pipes.
5. Install the short floor. If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, then install the cloth, then Then make up the four-way joint on both sides. Repeat the baffle until it is attached to the top.
6, the long side of the steel pipe. After the short-side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long tubes to the top.
7. Install the top steel pipe. After the two sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side backwards so as not to be installed. At the same time, the hanging steel pipe can also be used. The connector is installed, this is relatively simple.
8, set of wardrobe cloth sets. When the top of the big set is at the top, it is best to pull the bottom to the top, so that there is space to pull on the top until the corners are installed diagonally. At this time, the cloth cover can be pulled down. The wardrobe is installed. After that, I feel that the whole wardrobe is so big. It is more than a small series. It takes an hour to install it. As long as it is careful, it will not be wrong.
Guanda Star Cloth Wardrobe Installation? Guanda Star Cloth Wardrobe Installation Precautions
1, cloth wardrobe assembly preparation. Many of the simple wardrobes that have been bought have the steel pipes of the simple wardrobes with the marked numbers, and they can be put together with the same number. Then find out the parts of the simple cloth wardrobe chassis and put them together. Note that it is only the bottom part of the simple wardrobe. 2, the front of the wardrobe assembly
2, the cloth wardrobe assembly period. When installing the simple wardrobe, face down, and install the simple wardrobe from left to right or right to left; after assembling the simple wardrobe panel, please make sure that the diagonal error of the cabinet is within plus or minus 1MM. After measuring the diagonal of the simple wardrobe, please mark the side plates or the vertical plate of the back panel on the side panels of the simple cloth wardrobe to facilitate the nail backing.
3, cloth wardrobe assembly mid-term. The assembly of the cloth wardrobe is very cumbersome. At the time of assembly, attention should be paid to the assembly of the wardrobe structure, that is, the frame composed of these steel pipes. Because the main components and composition of the cloth wardrobe are the framework of these steel pipes. Secondly, after the frame is assembled, it is necessary to put on the cloth cover. When the cloth cover is set, the speed should be some. Try not to make the steel frame cut through the cloth cover.
The cloth wardrobe is different from other wardrobes. The cabinet of the cloth wardrobe is made of cloth. The main bearing of the wardrobe is the frame of the wardrobe. When we assembled the cloth closet, it was very simple. After assembling the frame of the Crown Star Wardrobe, the cloth cover on the outside of the cloth closet was completed on the frame.
Sensor Sleep Mattress,Smart Monitors Mattress,Sleep Tracking Mattress,Sleep Tracker Smart Bed System
ZHONGYUAN INNOVATION CO.,LTD , https://www.yuvicoutdoor.com