The overall wardrobe needs to be cleaned regularly to maintain the wardrobe.
[ Chinese wardrobe net ] If it is a whole wardrobe , it needs to be cleaned regularly. Most of the doors in the cloakroom are outside, and the inside of the cabinet is not covered. For better dust protection, a curtain can be placed on the cabinet or some storage boxes with lids can be purchased for small parts. Clothing. Objects with moisture and corrosive gases cannot be placed in the cloakroom, otherwise the cloakroom may be too humid. In addition, like the general wardrobe , the whole cloakroom also needs to be placed with some moisture-proofing agent during use to avoid the wet season.
To keep the wardrobe clean for a long time, scrub the wardrobe regularly, and do not mix dust or debris in the track. When cleaning the wardrobe, just use a semi-wet rag to gently scrub, do not use a corrosive detergent. For metal parts such as cabinets and tie rods, due to their own properties, they should not be wiped with a damp cloth to avoid rust and deformation. Just wipe with a dry part. Always open the wardrobe to make it breathable or use dehumidifying agents regularly to avoid moisture in the wardrobe. Use less or no fragrances because they have a certain degree of damage to the wardrobe.
Maintain the overall wardrobe, mainly from the five aspects of surface cleaning, scratch prevention, connection inspection, door maintenance and placement. It is normal for the light rail door pulley to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2-3 months. Do not place the closet in direct sunlight to prevent the wood from deforming or brittle under the light. When using the sliding door, be sure to check whether the handle is protruding. If there is a protrusion, press it first, otherwise it will damage the side cabinet or handle.
When there is dust on the surface of the wardrobe, use a wool or soft cloth to remove dust. If there is stain on the surface, use a wax to remove it. It is best to do regular care according to the actual situation. If you have the conditions, you can often apply oil to the veneer. Metal parts can only be wiped gently with a dry soft cloth. Do not use chemical cleaner or acid liquid. If it is found to have black spots on the surface, it can be wiped with a little kerosene.
Try to avoid damage to the ring or scratch the surface of the wardrobe. If the surface is slightly scratched and bruised, use a mixture of cloth ash and lemon juice or fried oil to dry it. After drying, it can be waxed; if the scratch is deeper, it will be more Seriously, it is necessary to reconcile the same color paint; check the joints regularly and find that the looseness is tightened in time. If the disassembly or assembly is caused by disassembly or assembly, the relevant brand store should be notified in time to assist in handling;
When using, pay attention to balance, avoid placing it in a place with high temperature, strong vibration, humidity or direct sunlight, and keep the room ventilated. Avoid contact with corrosive liquids on the surface of the whole wardrobe, such as sprinkling, banana water, gasoline, water, nail polish, strong acid, strong alkali and so on.
For those who run a business in the catering and reatsurant industry, serving trays are of great importance. There are different uses for serving trays including carrying food and beverages from one place to another as well as enabling those in the industry to serve specific sized portions of food. Some serving trays are used to hold plates and drinks, while other restaurants choose the tray to serve food on. for sure; serving trays are an important part of the food industry.
When choosing serving trays for restaurant and catering businesses there are a lot of aspects to take into consideration. First, you will need to make a choice of the color and size of the trays. You can buy serving trays in many different sizes, ensuring that every establishment} can use the trays that are most appropriate for their business needs. When trays are used to be carried through walkways, they must be small enough to fit comfortably through doorways. If they are too big, waiters will find that it is difficult to transport food with these trays and the chance of spills and accidents will increase. The task that is being accomplished will best determine the type of serving tray that is going to be used.
Serving trays should in some cases be nice looking and provide a visual addition to the food that is being served on the tray. Additionally, many restaurants consider the design or shape of the tables when making their serving tray selections. This can be very important when placing the trays on the table. Ensuring that the trays make a good looking presentation for each meal is vital to a restaurant's success.
Wooden Serving Tray,Serving Tray With Handles,Wood Tray Supplier,Wood Serving Tray,Solid Wood Tray,Serving Tray
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tigerwoodproduct.com