Good wardrobes should be designed!
[ Chinese wardrobe network ] classified by family members
Older parents stack more clothes, usually less hanging pieces, so you can consider making more layers and drawers when designing, while the elderly should not climb or squat due to physical condition, the drawer in the closet should not be placed at the bottom. It should be about 1 meter above the ground. If conditions permit, it is best to consider lifting the hanger on the upper level of the wardrobe.
Young couples’ clothing is diversified. Generally, the left and right sides are respectively set as the storage space for each of the men and women. The hangers in the cabinet are usually divided into two layers, the coat and the top, and the shirts can also be placed in separate small drawers or shelves, which are not wrinkled by the excessive laundry. Underwear, ties and socks can be used for special small plaids, which are good for clothing maintenance and more intuitive and convenient; sweaters can be placed in deep drawers; trousers are stored in special hangers.
Children's clothing, usually less hanging pieces, stacked more, and considering the placement of children's toys, it is best to consider a large cabinet when designing the wardrobe, only the upper layer of the pendant, the lower layer is vacant, convenient Children can open the door to pick up and collect toys at any time to meet the children's fun attitude.
Follow the wardrobe size specification
Generally speaking, each storage space of the wardrobe is dimensionally elegant. According to the designer, the height of the hanging short coat or top is not less than 800mm; the height of the long coat is not less than 1400mm; the height of the drawer is not less than 150mm~200mm;
As for the cabinets on which the clothes are stacked, the width of the cabinet is designed to be between 330mm and 400mm and the height is not less than 350mm. The upper end of the whole wardrobe is usually set up to place unused items such as quilts. The height should also be no less than 400mm.
Due to the different structure of each type of house, pillars and beams may appear on the wall of the installation cabinet. These beams and columns should be used as much as possible to maximize the use of the storage space of the cabinet without leaving a sanitary corner.
At this time, the height of the cabinet is usually 2400mm or 2300mm, but the height of the object exceeds 2.1 meters, which requires a ladder to help and easily cause structural instability. Therefore, designers usually recommend that the cabinet be divided into two sections. One layer is placed on the quilt and other uncommon items, and the bottom is the space for regular use.
Partition by replacement frequency
Although there is a lot of clothing in every family, if the space is planned and used unreasonably, it is easy to find a piece of clothing to look through the wardrobe, or a piece of your favorite clothes lying in a corner for a long time to idle. In fact, there are not many clothes to be replaced in each season. The designer suggests that the wardrobe can be divided into three areas according to the frequency of clothing replacement: the season, the season, and the regular change.
Three compartments are arranged at the top of the closet for stacking three seasons of clothing, while the lower part of the lower part is placed on the inside of the sliding door to store the season's clothing. It can also be stacked, but it is easier to pick than the top. use.
Arrange several drawers and hanging areas on the sides of the middle of the closet near the sliding door to store the most frequently changed clothes, so that the season clothes will be moved from the middle stacking area to the top over-season area each season. When the season's clothing is changed from the top to the season, there will be no sweaters when looking for T-shirts. When looking for coats, it is full of annoying shirts.
In addition, think about the suits that will be worn next week, and change the three or five sets of clothes to the normal change area near the sliding door. Because this area has the clothes, you can also iron it on the weekend. Get up, so you don't have to iron your clothes with fatigue on weekends.
Pay attention to detail processing
At present, many wardrobe manufacturers or owners often overlook many details when considering sliding doors, which may cause some parts of the cabinet to be unable to be used normally. For example, some owners make the cabinet into an unequal space according to their own preferences, and in order to maintain the beauty of the cabinet door, the sliding door is made into three or four equal parts. However, in actual use, because of the sliding door The problem of orbit, when opening a door, there must be two other together.
Therefore, when the cabinet is not equally divided, there is always a space that cannot be used. If it happens to be the position of the drawer, it may not even open. The wardrobe designer said that when the owner decides the cabinet, it is best to divide the space equally, so that there will be no embarrassing situation in the cabinet.
Our factory stay on a place where is famous of knife manufacture .It is fabricated from high-quality stainless steel,single-piece, precision-stamped blade construction provides durability,professional, fine-edge bladeboasts precision cutting and is finely honed for long-lasting sharpness.We are good at chef knife,bread knife,carving knife,utility knife,paring knife,sharpener,kitchen scissor,steak knife.We can provide the Knife Set or single knife which up to you.
Household Knife,Dinner Knife,Household Floding Knife,Stainless Household Knife
MEO DEMO CO., LTD. , https://www.meokitchentools.com