How to choose custom wardrobe plates? You must know these shopping tips.

[China] net wardrobe custom closet in addition to styling and practical, the most important part of the plate. Therefore, we must choose durable and environmentally friendly materials to have a comfortable home environment. So how should we choose?

Customized wardrobe plate purchase

1. Look at the sheet material

Judging from the cut surface of the sheet, the fine fibers inside the MDF are tightly combined, the density is large, the amount of glue is large, and the environmental protection coefficient is low; and the particle board is composed of small particles of logs, and the structure is intricately crossed. Strong nail force and long service life.

2. Look at the sheet substrate

As long as the content of free formaldehyde in the board is ≤9mg/100g, it is the E1 environmental standard, and it is not harmful to human health.

Custom wardrobe sheet

3. Look at the veneer

Some custom-made wardrobes look good on the surface, but with a light stroke, you can draw obvious scratches.

These custom-made wardrobes are made of sheets with styrofoam and ornate paper that are often used on low-cost wardrobes on the market, and have poor wear resistance.

Good custom wardrobes are generally made of dip-coated, thick-thick, high-temperature and high-pressure treated environmentally-friendly melamine veneer with high surface strength, abrasion resistance and scratch resistance.

Miso wardrobe

4. Look at the edge of the board

A good custom closet uses a precision panel saw to cut the board, and there is no chipping around the board. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them.

Some even cut corners and only cut one side of the front side of the board. The non-sealing surface easily absorbs moisture in the air, causing the sheet to expand, causing the wardrobe to deform and affecting the service life.

Customized wardrobe plate purchase

5. Look at the thickness of the sheet

In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18 mm, while the thickness of the plate used by small manufacturers is 16 mm, but it is 18 mm for consumers, so we remind everyone to pay attention.

Custom wardrobe sheet

Zebra Blinds Fabric

Zebra Roller Blinds,Zebra Blind Curtain,Zebra Blinds For Windows,Zebra Roller Shades

WUXI MIFUN INTERNATIONAL TRADE CO.,LTD , https://www.mifunblind.com