How to install the kitchen sink
The installation of the sink looks very simple, but if the previous installation is negligent, it will cause dirt, rust, and water leakage at the edge of the sink, which will cause trouble for later use. So how to install kitchen sink it? Kitchen sink material which is better? Next we take a look?
How to install the kitchen sink :
1. Reserved sink location
Although the installation of the sink needs to be carried out after the kitchen is renovated, the size and position of the sink must be planned in advance to avoid rework and delay the construction period.
2. Put the sink on the countertop
Before putting in the sink surface, install the faucet and water inlet pipe. Pay attention to the seal between the sink and the countertop, there must be no gaps, etc., otherwise it is easy to leak water and accumulate dirt later, which is difficult to clean.
3. Seal the filter and overflow hole
The overflow hole is installed under the faucet. In order to prevent the water in the sink from overflowing the countertop, the filter below the sink is used to prevent the debris from clogging the pipe. The seal must be ensured during installation, otherwise it will easily penetrate into the cabinet Causes mildew in the cabinet.
4. Water test and edge banding
Finally, after installing the sink hanger, you can start the water test. After filling up the water, take a look at the drainage and see if there is any water leakage. If there is no problem, you can use silicone to seal the edges.
Which kind of kitchen sink material is good :
1. Artificial stone sink
Artificial stone is usually used for the countertop of the cabinet, but because of the rich color, it can be matched with a variety of cabinets. In order to maintain the integrated effect with the cabinet, the sink body also uses artificial stone. The artificial stone sink is relatively bulky. Avoid scratching by hard objects such as knives during use. Always pay attention to cleaning, otherwise it will be difficult to clean up after a long time.
2. Ceramic sink
The ceramic sink is fired in one piece and is mainly white. It has the characteristics of high temperature resistance, easy cleaning, and aging resistance. It is also easy to clean daily. However, because it cannot collide with hard objects and weighs too much, it is recommended to pay attention to the support of the counter and countertop when purchasing.
3. Stainless steel sink
The stainless steel sink is the most widely used material, not only lightweight but also acid and alkali resistant, with a long service life. It is not easy to be damaged by scratches, and can be made into different shapes and styles, suitable for any kitchen countertop. It is a very cost-effective material.
Article Summary: The above is the kitchen sink to introduce how to install and kitchen sink material which good relevant content, we believe after reading the article, sun room sink for installation and material aspects have a certain understanding, the market sinks In addition to the materials introduced in the article, there are also high-end materials such as cast iron and fine brushed. Because of the outstanding artistic decoration effect, the price is expensive and it is not practical for ordinary families. If you need to know more building materials in the later stage, please pay attention to our website information.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Skin Care Machine,Reduce Wrinkles Machine,Remove Wrinkles Machine,Micro Needle Roller For Face
Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com