The decorative panel is fully decorated with veneer veneer plywood. It is a board made of natural wood veneer or artificial wood veneer attached to the surface of the plywood. Its surface is divided into two types:

One is a natural wood decorative single plate, which is a thin wood piece made by wood cutting or rotary cutting. The commonly used tree species are more than ten bells such as ash, oak, elm, elm, elm and yellow pineapple.

Because it is made of natural tree species, its texture is beautiful and natural, with excellent decorative effect.

The second is a single version of artificial wood decoration. This kind of plate is also called artificial thin wood, which is made into a wooden side by special technology, and then the thin wood piece which is sliced ​​and cut is relatively inexpensive.

The base layer of the decorative panel is the three-layer plywood that is commonly used.

Decorative single-face veneer plywood is usually named according to the tree species of the surface decoration single-plate, such as ash, artificial white enamel veneer, which is 2,440 mm long, 1220 mm wide, and 3 mm thick.

Decorative veneer veneer plywood is often used in the decoration of furniture and doors and windows in home decoration.

To make furniture, wall skirts or decorative doors, door doors, door edges, ceilings, etc., first use the large core board, multi-layer plywood, particle board or medium density fiberboard to make the basic frame structure, and then choose various tree types according to personal preference. The decorative panel is applied to the surface of the frame and then painted on it, such as polishing, lacquering, and the like.

In this way, the appearance of solid wood furniture can be achieved, and the cost is much lower than that of solid wood. Therefore, the current decorative veneer veneer plywood is widely used in the home.

So how do you choose a decorative board?

1. First of all, when purchasing, pay attention to whether the name, address and trademark of the manufacturer are complete.

Because only the fully-identified plates can get the quality assurance they deserve.

2. There is no obvious flaw on the surface.

The surface of the board should be smooth, burr-free groove marks and planer marks, no penetration phenomenon, no yellowing or blackening on the board surface.

3. Distinguish between artificial and natural veneers.

Usually the texture of the artificial veneer single veneer is basically straight texture, and the texture pattern has rules;

The natural wood single-face veneer is a natural wood pattern, and the texture pattern is natural and irregular, and the variability is relatively large.

4, no open glue phenomenon.

The glue and strength fully reflect the pros and cons of the gluing performance of the sheet, the glue strength value is about high, and the gluing performance is better.

When selecting the board, it should be noted that the decorative sheet rubber layer structure is stable and there is no open glue phenomenon.

Careful observation, bulging and delamination cannot occur between the surface single plate and the substrate, and between the layers inside the substrate.

5, the smell should be light.

The adhesive used for the decorative board is mainly urea-formaldehyde resin. After the decorative sheet is processed, a small amount of formaldehyde remains in the material and is gradually released. This smell is extremely harmful to the human body.

When purchasing, it can be judged from the smell, because the greater the smell, the higher the amount of formaldehyde released, the more harmful the pollution, the greater the harm.

6, pay attention to moisture content.

Usually the decorative single-face veneer plywood requires a certain moisture content, and the closer the moisture content is to the equilibrium moisture content of the use area, the better.

If the moisture content is too high or too low, the decorative board will have a large deformation under the influence of the ambient temperature change.

Therefore, in areas where the temperature is relatively small, it is preferable to use a decorative board having a lower moisture content; conversely, a decorative board having a higher water content should be used.

7. Observe the texture structure.

In the case that all other items are satisfactory, it should also be noted that the material should be fine and uniform, the color is clear, and the wood grain is beautiful.

The texture of the matching board and the parquet should be arranged according to a certain regularity, and the wood color is similar, there is no obvious color difference, and the seam is almost parallel to the edge of the board. Such a plate can receive a good decorative effect.

EVA Essential Oil Case: made with thick and hard eco-friendly EVA material, waterproof, lightweight and durable, ideal case for storage and carrying essential oils bottles.

we can handle all stages of your needs for EVA bag and case - from research and design, sampling, mass production, packaging and  logistics, We make it worry free and easy to do business.

1 Custom fabric and lining

2 custom logo design

3 custom inside design

4 Production 

5 custom zipper

Essential Oil Case

Essential Oil Case,Essential Oil Bag,Essential Oil Carrying Case,Essential Oil Holder

Dongguan Topreal bag&case., Ltd. , https://www.toprealcase.com