Electric grinding machine features


The main outstanding features are as follows: 1. Power supply is provided, no need to provide air pump, avoiding the trouble of the gas source and other factors, and saving production cost for the user. 2. Long journey, high efficiency, energy saving and environmental protection. The stroke of the similar pneumatic imported products is only 0.3-0.7mm, and the stroke of the product can reach 1mm. Due to the more optimized structural design, the maximum power is only 15W. Light weight, low noise and easy to carry. 3. Economical and practical. The price of this product is only a fraction of that of imported pneumatic products, which greatly reduces the user's cost of use. 4. Adequate accessories and easy maintenance.


DMJ-01A main technical parameters Power supply: AC90V-240V/50HZ-60HZ Power: Pmax=15W


Use of electric grinder Motor speed: 9000-12000r/min
Round collet: Ф3 flat collet: δ1MM, δ3MM
B, electric linear polishing machine ydmj-01A Model: ydmj-01A Power: 18 (W)


Scope of application: Mould, engraving speed: 15000r/min This product inherits the relevant advantages of pneumatic grinding pen. It uses dedicated 12V power supply for power, input power is only 5W (Max), is not limited by the site, and is extremely convenient to use and environmentally friendly ( Zero emissions), eliminating the construction investment of gas sources. The huge noise generated by the pneumatic grinding pen is completely eliminated. The speed of the product is divided into 4 speeds, I=9000 rpm, II=10000 rpm, III=12000 rpm, OFF. It is safer to supply power with low-voltage power supply. The diameter of the largest grinding wheel is Φ3mm, and the diameter of the largest grinding wheel is Φ3mm. The grinding machine uses power to do power, no need to provide relevant gas source, low noise, light weight, and the speed can reach 15000r/min. The main use occasion is the delicate grinding and polishing of the mold, and the handicraft factory finely polishes and polishes the crafts.


C, electric engraving and grinding machine ydmj-01b Model: ydmj-01b Input power: 27W no-load speed: 12000 (rev / min) Shift mode: Infinitely variable speed polishing wheel diameter: 5 (mm) Weight: 200 (kg) for the scope of application It is used for polishing, grinding and modifying multi-function electronic engraving machines for small parts that require fine processing. It is a new type of small engraving machine that can be used on wood, bamboo, plastic, metal, stone, The machine for engraving and polishing the soft and hard materials such as jade, ceramics, glass, etc., saves time and convenience, is more widely used than computer engraving machine, and is easy to carry.

  Wooden Products are wood-based raw materials that have been processed to produce products. It`s products include cork boards, Wooden Stamps, and wooden boxes and so on. In china, wooden products have always been very popular and often presented as gifts to others. 

   Our technical team has extensive experience in this field and can provide customers with customized product services.

Wooden Products

Small Cork Board,Wooden Logo Stamp,Wooden Gift Boxes,Decorative Wooden Boxes

Triple C International (Shenzhen) Co.,Ltd. , https://www.ccc-triple.com