Condensate test chamber and its technical application
The condensate test chamber is a new product made by Lin Pin according to the latest DIN EN ISO6270-2, DIN 50018-97 and other corresponding standards.The equipment can do 100% humidity test, and can test low temperature, high temperature and humidity in one. The test is an indispensable test equipment for quality inspection institutions, electronic and electronic, automobile and motorcycle industries.
The conditions that the test must comply with under constant condensation or condensation-alternating climate loads, so that the results measured in different laboratories are comparable. The condensate test chamber is mainly used to determine the characteristics of the test in a humid environment And the defects of corrosion protection, the test should not cause additional heat during the load process, the test switch test preparation test duration, test result calculation and result evaluation should refer to the corresponding formulation standards.
Condensation water test chamber test conditions: due to the radiation effect of the condensation artificial climate test chamber wall or the cooling effect of the test itself, the temperature of the test surface in the test chamber is lower than the saturation temperature of the ambient air in the test chamber. Moisture will condense on the test surface. During condensation in the condensation artificial climate test chamber, the air temperature in the test chamber is 40 degrees.
Condensation artificial climate test chamber has two kinds of constant climate and alternating climate. If in addition to the formation of condensate has an impact on the test, alternating air temperature and air humidity also have an important impact on the test, you can choose the alternate climate, in the condensation In terms of the influence of water, the amount of condensed water formed on the test surface is decisive. It is affected by the ambient temperature of the installed artificial climate chamber or the cooling effect of the sample. The condensate dripping from the test contains not only condensed water, but also It may contain dissolved or mixtures of solid and liquid components. Only under the same artificial climatic conditions and surrounding test process conditions can the test results be comparable. Generally speaking, the alternating artificial climate test chamber is based on 24H For alternating periods, the KTW artificial climate test chamber may use a shorter alternating period (12 or 16H), at which time the test period experienced by the sample will be shortened accordingly. Condensate test chamber and its technical application
Tube Bottles,Plastic Tube Bottles,Thick Bottom Glass Bottles,Tube High Thick Bottom Bottles
Zhejiang Changxing Hanghua Glass Co., Ltd. , https://www.hanghua-glass.com