What are the characteristics of water jacket and gas jacket for carbon dioxide incubator?
Maintaining a constant temperature in the CO2 incubator is an important factor in maintaining healthy cell growth, so an accurate and reliable temperature control system is an integral part of the incubator. In order to make the incubator work more stably, we recommend that users choose a carbon dioxide incubator with independent triple temperature control functions, namely temperature control inside the box, over temperature alarm control and ambient temperature monitoring.
Precautions for use 1. Close the door of the incubator to prevent gas leakage and affect the test results;
2. After the refrigeration system stops working, wipe the working chamber and the glass observation window with a soft cloth;
3. Before each stop, each control switch should be in the non-working state to cut off the power;
4. The carbon dioxide incubator should be placed on a flat surface, and the environment should be clean and tidy, dry and ventilated;
5. Do not adjust the pressure of the inflowing gas to an excessive level to avoid breaking the pipeline and damaging the detector;
6. Before using the instrument, each control switch should be in non-working state, and the speed control knob should be placed in the minimum position;
7. Proper use and attention to the maintenance of the instrument, so that it is in good working condition, can extend the life of the instrument;
8. Not applicable to the cultivation of articles containing volatile chemical solvents, low concentrations of explosive gases and low ignition gases, and toxic substances.
9. Keep the air in the incubator clean and disinfect regularly; always pay attention to the amount of distilled water in the distillation tank to keep the relative humidity inside the tank while avoiding evaporation of the culture solution;
10. During continuous operation, the instrument should be inspected regularly every three months; check for water droplets, dirt, etc. falling into the motor and exposed refrigeration components; clean the compressor, the dust and dirt on the condenser; Fuses, control elements and fastening screws.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in the production of constant temperature shaker, low temperature water tank, water bath constant temperature oscillator, gas bath constant temperature oscillator, shaker, incubator and other related instruments. The factory has strong technical strength, and various technical indicators are leading domestically. Shanghai Xinzhuang Instrument Co., Ltd. welcomes your inquiry http://
Gabion Box is also named Gabions, rock gabions, Welded Wire Mesh gabions, wire mesh gabions, gabion boxes, gabion mattresses, gabion basket, galfan coated welded gabions. It usually embraced two kinds of boxes. One is Hexagonal wire mesh gabion, other one is Welded Wire Mesh Gabion.
Hexagonal Wire Gabion is maded from hexagonal wire mesh in big mesh size and thick wire diameter.
Welded wire mesh gabion is made from welded wire mesh panels assembeld with spirals or clips and spacer.
Uses
bridge protection, River protection, ecological restoration
Highway retaining wall, foundation support
Gabions
Galvanized Welded Gabion Box, PVC Coated Hexagonal Wire For Gabion Box,Galvanized Gabion Box
DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , https://www.wiremeshsolution.com