The overall wardrobe is an important part of modern home decoration, material selection is critical

[ Chinese wardrobe network ] raw materials:

Plate

The board is the main component of the overall wardrobe , and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. The artificial board is divided into a splint, a particle board (particle board), a fiber board, and a solid wood multi-layer board, wherein the fiber board has high density, medium density and low density.

1. Solid wood particle board: middle long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantages are small expansion ratio, stability, and strong nail holding power. The disadvantage is that it cannot be surface-milled. Therefore, the solid wood particle board is more suitable for a drier environment such as a wardrobe.

2. MDF (fiberboard): The wood is broken, the original fiber is pressed by high temperature, the surface is flat, and it has the advantages of easy milling. It is better than particleboard in strength and hardness. But there are also shortcomings that are not resistant to blisters. The amount of expansion after being blistered is approximately 2 mm on one side.

3, wood plastic louver: wood plastic louver board has waterproof, anti-mildew, anti-insect, antibacterial, acid and alkali resistant, washable, environmentally friendly, formaldehyde-free, not easy to deform, no cracking and has flame retardant and self-extinguishing function . The surface treatment of wood-plastic louver is good in smoothness, no obvious defects, and the texture is obviously stronger than the MDF. Moreover, the film is adhered and has high strength, and it is not easy to foam in a sun exposure or a humid environment. However, the price is relatively expensive, the quality of the narrow sliding door is slightly lighter, and the hollow structure is not very popular.

The common points of the above three kinds of plates are artificial plates, and they are not immersed in water. Therefore, the cabinet installer will put a bright waterproof tin foil on the incision when assembling the cabinet.

As for the MDF louver, it is not moisture-proof, water swells, easy to mold, moist and long green hair, can not be cleaned, and formaldehyde is released. Easy to deform, not flame retardant, low price, weight suitable for sliding door, solid structure, high popularity.

4, solid wood multi-layer board: solid wood multi-layer board (徳菲亚 becomes a new solid wood) is made of three or more layers of veneer or thin board through the high-temperature and high-pressure board glue, is a multi-layer plywood arranged in a crisscross As the substrate, supplemented with polymer glue, the surface is made of high-quality solid wood veneer or technical wood as the fabric, which is made by several processes such as cold pressing, hot pressing, sanding and health preservation. The solid wood multi-layer board is evenly used. Plywood pressing, with small deformation, high strength, good internal quality, good flatness, and can produce 5-40mm layers of different thickness according to demand. The multi-layer solid wood board also has the characteristics of being difficult to deform and the excellent performance of adjusting the indoor temperature and humidity. After the melamine finish, the surface of the board has the texture and feel of natural and real wood, which can bring more choices to consumers. Only the brand-name closet in the brand closet uses and promotes the new solid wood (multi-layer solid wood) custom closet.

Border material

The frame materials of all wardrobes in the market mainly include aluminum alloy, aluminum-titanium alloy, magnesium-titanium alloy and high-quality color steel. Generally, magnesium-titanium alloy and aluminum-titanium alloy have high strength, durability and firm quality, which can ensure the cabinet door is high. 2.8 meters without deformation, smooth sliding. The carbon steel frame is light in weight and the appearance is painted, and the paint will be stripped or oxidized and rusted for a long time.

The pulley of the closet is divided into the upper wheel and the lower wheel. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled. The bearing capacity can reach 200 kg, the wear resistance is high, and the push-pull life can reach more than 300,000 times.

Some brands use a set of upper wheels (hanging rails), so that the lower wheel has to bear the weight and has a guiding effect. The pressure is too large, it will be easily deformed after two or three months, and the service life is not high. The better manufacturers use the upper and lower sets of wheels, the upper rail guide, and the lower rail load, so that the pulley can be better protected, so that the maximum load of the pulley can reach 200 kg, and the service life can be more than 300,000 times.

Material selection:

The choice of composite multi-layer solid wood or moisture-proof board is suitable for the home environment with relatively high environmental protection requirements, practicality and long service life. The economically-allowed friends can be the best choice.

The original plate is made of crop straw as the main material, combined with the world's leading MDI zero aldehyde technology, preferably imported from Germany, food-grade coating film, creative design and manufacture, the market has responded well since its launch. The original series is mainly called “ecological environmental protection”. The biggest advantage lies in the original core used in it. It is the straw of the superior production area of ​​the selected recyclable crops, and only the straw with uniform density and good mechanical properties is selected as the raw material.

Composite solid wood, moisture-proof board (so-called moisture-proof only acts on moisture in the air) Solid wood paint-free board: both moisture-proof, environmentally friendly, and cost-effective. National cabinet products have experienced more than ten years of development, more than ten years of experience is enough to determine the wardrobe with a moisture-proof board is the best choice! The moisture barrier of the cabinet can be used in heavy humid environments, showing its high quality. Due to the more fragile surface, the requirements for production equipment are higher. The new wall is decorated and painted, and the wall will have a small amount of water. After the whole wardrobe is installed, it cannot be ventilated, and the back part of the wardrobe needs a plate with better moisture resistance. The moisture-proof board is immersed in water. Because of the long wood fiber and the green moisture-proof agent, the immersion expansion will not expand until it is soaked to a certain extent. Therefore, the moisture-proof board of most brand cabinets is the main material of the cabinet, which is reasonable.

Chipboard and MDF; MDF, also called MDF, is made of wood powder and has better flatness. It is more suitable for boring and milling. It is usually used for stenciling, such as baking varnish and molding (blistering). There is also a softer material for MDF, which is less prone to blasting when sealing, and easier to process, so many small factories use medium denier. In terms of moisture resistance, the particle board is much less resistant to moisture than the moisture-proof board, and the green core moisture-proofing agent is less. If it is in a humid environment for a long time, the wood is prone to mold and decay.

Fourth place / small factory low-cost production of particle board: Most small manufacturers consider the cost, generally using particle board (that is, solid wood particle board), using ordinary glue, the lowest cost among the three materials.

Eco-board: (refers to the ecological board produced by small workshops) large core board or sandwich board plus double-sided paste triammonium surface! Quality: Sandwich panels (commonly known as blockboard, wood board) are plywood with solid wood core. It cuts logs into strips, splices into cores, and is made of outer surface materials. The force of the whole board comes from thin. The two-layer outer veneer is spliced ​​with wooden blocks in the middle, and the substrate is basically free from force and is easily broken and deformed. Most of the plates are made of fir for one or two years. As long as the pieces are broken with fingers, the nail holding power is several times lower than the national standard. Environmental protection: The advantage of the ecological board is that the substrate looks good. It feels like wooden blocks. The name of the ecological board is also very good. It also has the feeling of environmental protection. Everyone knows that the environmental protection standard of the board is mainly glue, and the environmentally friendly E0. The cost of E1 glue is very high. The small-scale factory will never use this kind of environmentally-friendly glue, all of which use industrial glue, and the cost is relatively low. Almost all large-scale brands in the national furniture market will not use ecological boards or fir boards. Before 2005, almost all the new homes were decorated with sandwich panels, almost all of which exceeded the standard. After the rise of the large wardrobe brand, the use of moisture-proof panels and MDF, rarely heard of environmental standards.

The overall wardrobe is becoming an indispensable part of modern home decoration. The overall wardrobe is tailor-made, and environmentally friendly, fashionable, professional and other characteristics, will be destined to become a hot spot for household wardrobes in the next few years.

Cabinet Door Bumpers

Cabinet Bumpers,Cabinet Door Bumpers,Cabinet Door Stops,Kitchen Cabinet Bumpers

Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com