How to buy good quality furniture
The most troublesome thing in the decoration is the selection of furniture. From style and style to product quality, there are many things to understand. It is not easy to buy furniture that is good in quality and suitable for you. Today, furniture fans will share with you how to choose furniture.
Surface inspection
Different furniture, surface materials are different. See if the color is coordinated, and the furniture should pay attention to the unity of the overall color. Wipe the surface of the table to see if the paint surface is smooth and smooth, with or without sag, crack, bottom, blistering, scratching, etc. See if there is a gap between the veneer and the veneer, between the veneer and the line, and whether it is smooth.
The legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, which is too thick and easy to bend and deform. Kitchen cabinets and bathroom cabinets cannot be made of fiberboard, but plywood should be used because the fiberboard will expand and damage when exposed to water. The table should be washable. It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
Wood moisture content
Buying furniture requires checking the dryness of the wood inside the furniture to identify the moisture content of the wood. Furniture with high moisture content is easily deformed and sampled. When purchasing, the moisture content of wood should not exceed 12%. If there is no test instrument, you can use the method of hand touch to touch the bottom of the furniture or the place where there is no paint inside. If it feels moist, the moisture content is at least 50%. Can't be used at all. Or you can sprinkle a little water on the unpainted wood. If the sputum is slow or not, the water content is high.
Further reading: Wood moisture content should be understood when making furniture
Furniture structure
Look at the rationality of the materials used in each part, the structural parts can not have defects such as decay, thrift, and splitting; whether the shape and size meet the design requirements, whether it is firm and safe. Also need to see if the interior of the furniture is clean and there are burrs.
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there is a murmur, indicating The blink of an eye is not tightly integrated and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit down and watch if there will be a twist. The square table, the table, the chair and other legs should have four triangular clips for fixing. When picking, you can look over the table and chair.
Is the four feet flat?
When you flatten the ground, you know that some furniture has only three legs to land, and such furniture will affect the length of use in the later period. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be horizontal and vertical and should not sag. See if the drawer rails are flexible and have no obvious swings and clicks. Look at whether the door handle and hinge are installed properly, and whether the door opening is flexible. Look at the surface of the cabinet door is flat, with or without deformation. Look at the gap between the cabinet door and the furniture frame, whether the gap between the cabinet door and the cabinet door is properly controlled.
Veneer furniture seam
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is easily damaged and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse.
Furniture edge
The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The bag is nailed with nails. Pay attention to whether the nail holes are flat and whether the color of the nail holes is consistent with other places.
Mirror furniture
Choose furniture with mirrors, such as Dressing Table, mirror, and dressing mirror. Take care to see if the mirror is deformed or not. Check if there is lining paper and backing plate at the mercury in the back of the mirror. If there is no backing plate, it will not work. No paper will be used. Otherwise, the mercury will be worn away.
Paint part
The paint part of the furniture should be smooth and flat, no lacquer, no wrinkles, no flaws. The corners are not straight at right angles and are prone to slag and paint. There should also be a paint inside the door of the furniture, without the paint board being easy to bend and not beautiful.
Accessories installation
Check that the door lock is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two. The upper three silks, some cut corners, only one screw, will be used.
Sofa, soft bed
Note that the surface should be flat, but not high and low; soft and hard should be uniform, but not hard, that piece is soft; softness should be moderate, neither too hard nor too soft. The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, you should also pay attention to the details of the quilting with or without wire breakage, jumpers, and reasonable density.
Furniture color
Although the white furniture is beautiful, it is easy to turn yellow when it is long, and the black is easy to gray. Don't be beautiful at the time. At the end, it is not white, black is not black. In general, furniture that resembles mahogany is the most difficult to change color.
Tips
1. The furniture of the cabinets is not loose in the structure of the cabinet, the joint parts of the concrete are not firm, and there are broken and broken materials.
2. The interior of the furniture uses decaying wood or wood that is still eroding by insects, so this is also a poor quality furniture.
3, to buy furniture depends on the use of materials, such as the use of particle board, medium-density slats for the door edge of the wardrobe, columns and other load-bearing components can not be selected.
4. Furniture with glass should pay attention to whether the glass slab is made of nails. The furniture made of nails can easily cause glass breakage and endanger personal safety.
5, see the functional size of the furniture is in line with the requirements of the standard requirements, such as: the height of the hanging space of the large wardrobe is less than 1350mm is not good, the depth is less than 520mm is not good ...
6, frame furniture, should pay attention to the structure of the furniture is not the use of nail structure, such as not open, not eye-catching, no glue, loose structure, weak furniture are quality. (some texts come from the Internet)
Panel furniture: mainly look at the surface of the sheet for scratches, indentations, bubbling, degumming and peeling marks and other defects; wood grain pattern is natural and smooth, do not have the feeling of artificial creation; for symmetrical furniture, more attention to the board The color of the face, the consistency of the texture, and the harmony make people feel that the symmetrical plate is like a piece of material. If a piece of furniture is modular, its hardware connections should be of high quality, and the adhesion of the hardware itself and the adhesion to the furniture must be ideal. For the overall structure of the furniture, each connection point, including the connection points between horizontal and vertical, must be tight, no gaps, and no looseness.
Solid wood furniture: First of all, to judge the tree species, this is a very important factor that directly affects the price and quality. Also observe the wood, open the door, drawer, and observe whether the wood is dry, white, and the texture is tight and delicate. If you have made materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for irritating smell. The main stress-bearing parts, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The components of the wood-based panels used in the furniture shall be edge-sealed, and the installation shall be carried out with few pieces, missing nails and nails. The strength of the board surface can be pressed with a finger to feel the firmness of the board surface.
Due to the wide variety of furniture, we only talk about the precautions for most furniture today, and what else needs to be understood, you can pay attention to more articles on this site!
Dining Room Furniture,Dining Chairs,Dining Table And Chairs,Modern Dining Chairs
Foshan Poesy Furniture Co., LTD. , https://www.poesyfurniture.com