Explanation of imposition and joint knowledge
We don't always make 16K, 8K, etc. regular prints in our work, especially the packaging boxes, small cards (qualification certificates), etc. are often not closed. At this time, we need to pay attention to as much as possible when imposing Put the finished product in the proper paper opening range to save costs.
1. The following first introduces formal imposition
Take the Dadu 16K cover as an example: (Demonstration software: CD8). According to the printing needs (such as quantity) and the limitations of the printing plant equipment 8K machine, 4K machine, start-up, full-sheet machine, we also need to make different adjustments according to the actual situation when we make up, generally 8K or 4K is enough It's used, because it can be used on the two-side and full-open printing machines, and it can be solved by self-turning or front and back printing.
In the example, the bleeding edge is 3 mm. Fight 8K version (side by side), page size (pictured), bleeding edge (****), net size (blue) Fight 4K version (head to head), page size (pictured), bleeding edge (** **), net size (blue)
2. Single-page printed matter
During imposition, the middle (vertical center line) of the splicing part has a 6 mm bleeding edge, that is, each single page has 3 mm bleeding on the four sides (two cuts are required).
Note: If the printed product you made does not have bleeding pictures, shading, or completely one-color shading, etc., you can use the method of 1 imposition, just a knife in the middle.
3. Imposition of the envelope
In general production, we are used to putting the envelope together with the "tongue". This method is more paper-consuming (a blank is not used), but the pattern is good in continuity.
Another method is to return the cover to the cover. The "tongue" is made separately, which saves paper, but there is one more "pastework", that is, one more glue (or one more double-sided tape) when finished. The green part in the picture is the pasted part.
4. Box imposition
Generally, the large packaging box (over 8K) can be directly delivered to the printing house for printing without imposition.
The following briefly introduces the imposition of small packages.
Try to make the imposition work the most compact under the premise of opening, but the packaging box involves more post-processes. Rolling the box (cutting the edge and pressing the crease line) is the most critical. At this time, you need to pay attention to the imposition The distance between the two nearest edges is not less than 3mm, otherwise it will be very troublesome when arranging the knife version, which will affect the quality of the product.
After you complete the imposition (with the customer's signed agreement), it is best to produce a large original knife version of the film, so that the printing factory can arrange the knife.
5. Business card
Allies who may be engaged in typing, copying, and making business cards have such experience, making 8 business cards on a business card paper, and then cutting them out with a card cutting machine. In fact, this is wasteful. My experience is that one business card paper can make 10 business cards without a card cutting machine. If the number is small, you can use a ruler and a knife. If the number is large, you can use the printing machine ’s paper cutting machine. Very convenient and economical. If you only make one or two boxes of business cards, and it happens to be in color, and you happen to have an envelope in your hand, then use the blank space of the envelope.
6. Tag cards and stickers, etc.
Something annoying. However, it is not difficult, so be careful and calculate the size. Divided into three categories:
(1) One-size-fits-all (no bleeding), similar to business cards, the outermost edge of the whole needs bleeding;
(2) Two cuts (including bleeding)
(3) Rolling boxes, punching holes, fillets (requires a knife arrangement, the spelling method is the same as 2)
(4) In the case of mixed proportions, in the case of a proportional number, you can mix and match in the closed layout.
7. The following is a recommended method for drawing a corner line that I often use. It is very practical.
(1) Select a hand-drawn tool, press the Ctrl key, draw a straight line segment (hairline) vertically in the upper left corner of the page, and change the size to 3mm;
(2) Ctrl + A (alignment and distribution), D, T, L; [Note: Alt + A + A (the way to open the menu) in CD9 and above, the same below
(3) Change the x coordinate to 3, and tap the numeric keyboard + sign (the far right of the keyboard) to copy a line;
(4) Change the x coordinate to 6, and group two line segments;
(5) Press the + button again to copy, and rotate 90 degrees;
(6) Decrease the x and y axis coordinates by 3 respectively, a group of corners has been completed, then copy this group of corners and press the + key, and then mirror horizontally;
(7) Ctrl + A, D, R, no need to use T at this time, the figure moves horizontally;
(8) Select all two sets of corner lines, press + to copy, and mirror vertically;
(9) Ctrl + A, D, B, the corner line is completed.
(10) Finally, do n’t forget to add the CMYK color scale
Medical hyperbaric oxygen chambers are usually large in size and require professional medical personnel to operate, requiring high levels of professionalism. Modern people are increasingly pursuing quality of life and focusing on health preservation. Therefore, home hyperbaric oxygen chambers have emerged, which are more user-friendly.
The shell of DOING Hyperbaric Oxygen Chamber comes in two types: soft TPU material and hard stainless steel material, which can be selected according to personal preferences.
DOING has independently developed sleeping hyperbaric chambers, sitting hyperbaric chambers, and spherical hyperbaric chambers for users to choose from.
The production of DOING hyperbaric oxygen chambers has undergone layers of inspection to ensure reliable quality and reassure users.
The two transparent observation windows and dual pressure reducing valve design of DOING hyperbaric oxygen chamber greatly improve the safety of use.
The hyperbaric oxygen chamber developed by DOING has a mature and stable control system, which can display real-time values such as PM2.5, temperature, oxygen concentration, and negative ion parameters.
Soft Home Hyperbaric Chamber,Soft Pressure Oxygen Chamber,Soft Oxygen Recovery Chamber,Soft Hyperbaric Healing Chamber
Danyang Doing Articles Co.,Ltd , https://www.dydoing.com