How to save energy when paving the configuration and using the electric floor heating system?
The thermal conversion rate of electric energy is 100%. Therefore, the electric floor heating system can be said to be an energy-saving and environmentally friendly system. In the actual use process, people often call the electric heating system to consume electricity and scare people. In fact, the power consumption rate of the electric floor heating system has a lot to do with its paving, configuration and people's use. So, how to deploy the configuration and use the electric floor heating system is more energy efficient?
Electric floor heating system paving precautions
If the paving and configuration of the electric floor heating system is very perfect and reasonable, the electric floor heating system will be more energy-efficient to use. Otherwise it will cause a great waste of energy. Therefore, electric floor heating enterprises should pay attention to the following matters during the construction process:
First, in the determination of the power of the electric floor heating system, pay attention to the power of the electric floor heating system to match the housing area, try to avoid "small horse-drawn carts."
Second, in the southern regions like Shanghai and Hangzhou, dry paving is suitable. This paving method will make the electric floor heating system warm up faster and consume less power.
Third, the thickness of the regenerative layer should be appropriate. Due to the different living habits in the north and the south, the electric floor heating system requires immediate opening and heating in the south, the regenerative layer can be thinner, while the northern part requires a better thermal insulation effect, and the thermal storage layer should be slightly thicker.
Fourth, the wire mesh of the fixed heating cable can not be ignored, because it can increase the strength of the concrete, and some installation companies may remove the wire mesh in order to save costs. Obviously, this will destroy the insulation and cause energy waste.
Fifth, the floor insulation materials must choose the national standard products. Although the price of the national standard product is relatively high, the bottom layer is made of 4 cm thick insulation material, which is 2 cm more than the ordinary product, and the insulation effect is good. At the same time, do not ignore the role of corner insulation.
Sixth, the decorative layer is best to use marble, ceramic tiles and other materials. If the bedroom is made of solid wood and the living room is made of marble, then the power consumption per bedroom of the bedroom is 20 watts to 30 watts higher than the living room.
Seven, do a good job of building insulation inside and outside the wall. The external wall insulation effect is good, suitable for new buildings, and existing buildings can work hard on indoor insulation.
Tips for using electric floor heating system
After the electric floor heating system is fully configured, the power consumption of some electric floor heating systems in actual life can be basically eliminated. If the user can use it correctly, the electric floor heating system will achieve the best operation effect. Therefore, the user should pay attention to the following during the use:
First, the indoor temperature should be controlled within a reasonable range (16 ° C ~ 20 ° C is appropriate). If the indoor temperature is set too high, not only will it consume a lot of energy, but it will also make the temperature difference between indoor and outdoor too large. People not only feel uncomfortable indoors but also have a cold.
Second, in areas that must be heated, such as northern Shaanxi, it is recommended not to turn off the electric floor heating system. Because the indoor temperature rises a certain amount of time, the time switch is not only affecting the service life of the system, but also affecting the heating effect. Moreover, it takes about two or three hours to raise the temperature once. At this time, the power consumption is relatively large, and it is not energy-saving when it is often turned on and off.
Third, try to use intelligent control system. The intelligent system will automatically adjust the room temperature according to the change of time and the behavior of the owner to achieve energy saving effect. For example, at night, the user is generally not in the living room, and the intelligent control system will appropriately lower the temperature of the living room; during the daytime, the user has less time to go to the bedroom, and the intelligent control system will appropriately lower the temperature of the bedroom.
Compostable spoons are an alternative to traditional plastic spoons, which are made from non-renewable resources and can take hundreds of years to decompose. They are often used in settings where single-use utensils are necessary, such as take-out restaurants, food trucks, and outdoor events.
Compostable Spoon,Biodegradable Spoons,Compostable Plastic Spoons,Disposable Spoons
Anhui Jianfeng Environmental Protection Technology Co., Ltd , https://www.ahbiocutleries.com