Bending tester test function

The bending tester is generally applied to the quality control of quality supervision and inspection in production companies and industries. It is an indispensable testing equipment for material development, physical property testing, teaching research, quality control, feed inspection, and random inspection of production lines. Copper/rubber, plastic, wire and cable, fiber optic cable, steel pipe, spring steel, bearing steel, stainless steel (and other high hardness steels), castings, steel plates, plastic wood, glass, etc. Flexural modulus test.
The common test function of bending tester:

1. Automatic clearing: The computer receives the test start instruction and the measurement system is automatically cleared.
2. Automatic return: After the automatic identification test breaks, the active beam automatically returns to the initial position at high speed.
3, automatic save: test data and experimental conditions automatically save, to prevent sudden loss of power because of forgetting to save the data lost.
4, the test process: the test process and measurement, display, analysis, etc. are completed by the computer.
5. Display mode: The data and curve are displayed dynamically during the test.
6. Reproduction of results: The test results can be accessed arbitrarily, and the data curve can be re-analyzed.
7. Curve traversal: After the test is completed, you can use the mouse to find the point-by-point force values ​​and deformation data of the test curve, which is convenient and practical for obtaining test data of various materials.
8. Comparison of results: multiple test characteristic curves can be superimposed, reproduced, enlarged, and presented with a set of samples in different colors;
9, curve selection: According to the need to select the stress strain, force time, intensity time curve display and print;
10. Batch test: After one set of the same parameters, one batch of samples can be tested sequentially;
11, test report: (according to customer needs)
Stretch: maximum force, tensile strength, elongation at break, elastic modulus, etc.
Bending: Maximum force, bending strength, deflection, elastic modulus, etc.
Compression: maximum force, compressive strength, yield strength, elastic modulus, etc. The test report can also be programmed and printed in the format requested by the user.
12, limit protection: a program-controlled and mechanical two-level protection;
13, overload protection: when the load exceeds the rated 10% when the automatic shutdown;
Emergency stop: Equipped with emergency stop switch, used to cut off the power of the whole machine in emergency;
Automatic diagnosis: The system has an automatic diagnosis function, over-pressurizes the measurement system and the drive system at regular intervals, over-current, over-temperature waits until inspection, and an abnormal situation occurs immediately.
14, the end of the test can be automatically archived, manually archived, the test automatically calculates the maximum strength, the upper and lower yield strength, ring method, step-by-step approach, non-proportional extension strength, tensile strength, compressive strength, any point of the extension Strength, Constant Load Extension, Elastic Modulus, Elongation, Maximum, Minimum, Average, Net Energy, Total Energy, Flexural Modulus, Breakpoint Displacement, x% Load, Breakpoint Load, X% Displacement, etc. . Backup: Test data can be saved on any hard disk partition.
15, to achieve independent operation of the host and the computer.
Moxin instrument professional R&D and production: bending tester, three/four point bending strength tester, metal bending tester, steel plate bending tester, plastic bending tester, material repetitive bending tester, universal testing machine, tensile testing machine, twisting Test machines, impact testing machines and other mechanical testing equipment, welcome all new and old customers to call the factory to discuss consulting!