Wardrobe maintenance has a coup, the beauty clothes are not saved

[ Chinese wardrobe net ] Wardrobe maintenance has a coup, the US clothing is not saved

In addition to cosmetics, what is called a "good friend" of a woman, Xiao Bian believes that it must be a wardrobe. The wardrobe protects the beautiful "robes" of women and prevents clothing from being damaged.

Therefore, the cleaning and maintenance of the wardrobe must not be taken lightly. Today, Xiaobian will explain how to maintain the wardrobe.

Point 1 / Temperature

Wood furniture is sensitive to temperature, and the change in temperature plus the inherent thermal expansion and contraction of the wood itself can easily deform the panel of the wardrobe. So what can we do to avoid damage to the wardrobe?

1 The position of the wardrobe should be kept away from heat sources (for example, air conditioning vents, heaters, etc.), and the wardrobe should not be placed in direct sunlight;

2 Try to choose the quality of the closet veneer, the quality of the closet veneer can withstand the impact of temperature changes, not easy to foam off.

Point 2 / Humidity

The slab closet is damp for a long time, and the sealing joint will expand and deform due to the increase of water content. If it is serious, it will cause the board to crack. Therefore, we need to reduce the air humidity.

Damage to the wardrobe.

1Resolve from the source, avoid placing the closet close to the damp place (such as the toilet and bathroom), and avoid placing the container with water next to the closet to avoid

Overturning the wet wardrobe;

2 In the weather with high humidity, you can use some dehumidifiers in the closet. At the same time, lime and dehumidifier can be used to reduce the indoor air humidity;

3 Select the veneer with less water absorption. If it is a solid wood veneer, you can choose ash and teak, the expansion and contraction rate is small, and the water absorption of maple is large, you need to be cautious.

select;

4 Protect the edge of the wardrobe sheet to avoid touching water or other solvents, otherwise the edge will fall off easily. Edge sealing is very important for the moisture resistance of the wardrobe sheet, which can isolate the moisture in the air from the contact with the wardrobe sheet;

5 If the unfortunate wardrobe is drenched with water, then "emergency measures" should be taken. You should immediately use a dry towel to remove the water, then use absorbent cotton or absorbent paper.

The remaining water is blotted out and can be blown dry with a hair dryer, but avoid blowing the mouth too close to avoid damaging the wardrobe finish.

Metal Deep Drawing Punching,Stamping

We can make different kinds of Switch Plate Cover,Cup Holder,Vision Panel,Cover Plate for you.

Switch Plate Cover,Cup Holder,Vision Panel,Cover Plate

MGX Metalworks Co., Ltd. , https://www.mgxmetal.com