What material is the best quality overall wardrobe?

[China] net wardrobe so-called "whole wardrobe" refers to the factory custom size according to the site is complete, and then assembled on site wardrobe. The whole wardrobe should be divided into two parts: the cabinet board and the door panel. The old friends below will introduce the advantages and disadvantages of each material. 1. The wardrobe board commonly used in the cabinet board is no different from the appearance.

The so-called "integrated wardrobe" refers to the wardrobe that is assembled according to the size of the site to the manufacturer and then assembled on site. The whole wardrobe should be divided into two parts: the cabinet board and the door panel. The old friends below will introduce the advantages and disadvantages of each material.

1, cabinet board

The commonly used wardrobe plates are no different from the appearance. They are all melamine film with a layer of imitation wood grain. However, when the plate is cut to see the internal materials, the difference is very big. There are MDF and moisture-proof plates (solid wood). Particle board), ecological board, etc., a material called "hexiang board" appeared on the market last year. The cost, price and durability of these panels are very different.

1 high density board

This is the most commonly used sheet for the whole wardrobe, because the cost is the lowest, it is pressed by waste paper pulp and glue, and the water will expand. No matter which brand of the overall wardrobe, as long as the use of high-density board, there will be an unpleasant smell after cutting, environmental protection is also unqualified.

2 moisture-proof board (solid wood particle board)

From the name point of view, it is known that the solid wood is granulated and then pressed with a glue to bond, retaining some of the physical properties of solid wood, better nail holding power, lighter texture, will not cause too much pressure on the wardrobe However, the bearing capacity is not weak, and the cost is low, and the cost performance is high. Therefore, it is often used in the manufacture of wardrobes. But after cutting, there will also be an unpleasant taste, and environmental protection is similar to high-density boards.

3 fragrant board

The crop straw slag is used as the main raw material, and MDI glue and functional additives are applied, which are produced by high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has the characteristics of good dimensional stability, high strength, environmental protection, flame retardancy and weather resistance. It also has excellent processing performance and surface decoration properties, and is suitable for various surfaces. Decorative processing and machining.

4 multi-layer board (ecological board)

On-site woodworking wardrobes, the original use of large core boards, in recent years generally used to use multi-layer boards, the overall cabinet and the overall use of the multi-layer board, is to use this kind of multi-layer board for the on-site wardrobe, posted on the outside Made of wood-like melamine film, the environmental protection index can achieve the E0 level of formaldehyde, which is the first choice for high-quality whole wardrobe cabinet.

If it is a well-ventilated space, such as a garden or a living room, you can use the MDF and the moisture-proof board cabinet from the perspective of saving money. However, if it is a space with poor ventilation, especially the bedroom, try not to use it. For environmentally friendly panels, it is recommended to use a more environmentally friendly and durable ecological board. When installing the wardrobe, remember to add moisture-proof nails at the bottom, so that the bottom of the wardrobe is about 2 mm from the ground to ensure the air circulation of the bottom and back of the wardrobe to prevent mildew.

There are also a lot of fakes in the overall wardrobe market. Some specialty stores use the banner of “Thanksgiving Specials”. The plates for customers are not the brand that they distribute, but the local small workshops. The identification method and the whole kitchen The cabinet is the same: look at whether the sheet edge banding has the manufacturer's logo, and the plate produced by the regular manufacturer, the edge banding is generally thicker, and the sides are trimmed into a smooth and even curved edge.

2, wardrobe sliding door

The sliding doors of the wardrobe store are generally divided into two types: the original manufacturer and the merchants do the local small workshops. The former is more elaborate than the latter, and the purchase price is also large. The ex-factory price of the ordinary style is generally around 280 yuan/square. However, the locals only need 180 yuan / square. The sliding door of the whole wardrobe store to engage in "grateful specials" is generally made by local small workshops.

The sliding door frame of the wardrobe is made of aluminum alloy, and the middle part is divided into three types: tempered glass, MDF and PVC board. Among them, the most commonly used one is MDF. The price of MDF sliding doors in the same production channel is affected by two factors: the width and thickness of the aluminum alloy, and the treatment process of the MDF surface.

[Small series suggestion]

1, the first choice to buy a complete set of finished products, because the complete set of furniture, more coordinated with some, the production line, the cost is also lower;

2, if there is indeed a need to customize, the living room conspicuous partition and TV cabinet, etc., it is not recommended to take the material of the custom overall wardrobe, because the edge of the board and the installation of the screw hole and other issues can not be resolved, there are obvious defects, The grade is low. It is recommended to draw the drawings first and find the custom furniture factory. You can use the equipment of the furniture factory to make the overall wardrobe and the woodwork that the on-site woodwork can't do. The grade is higher and the cost will not be higher than the price quoted by the decoration company. The height of the plywood wardrobe made on site is much higher;

3, if the room needs a custom closet, you can consider customizing the whole wardrobe, the manufacturer is done, the site is assembled, the nail hole is blocked by the sliding door panel, only the side of the cabinet plate is exposed, it is not ugly.

4, if you choose the on-site woodworking wardrobe, it is recommended to use white paint, you can cover the nail holes and edge seals on the cabinet, and buy the sliding door with the market to find some. If the decoration style is not suitable for white, but the brush needs to show the varnish of wood grain, it is impossible to cover up the smashing of the woodworking cabinet on the spot. It is recommended not to do it.

5, wet areas, the wardrobe should try not to do the swing door, to prevent the clothes from smashing inside.

home office Chairs

Office Desk Chair,Office And Desk Chairs,Best Desk Chair,Best Home Office Chair

Anji TianWei Steel and Plastic Products Co.,Ltd , https://www.twchair.com