What are the reasons for the splashing of the toilet? Solution for toilet splashing
With the continuous development of the society, many people use toilets such as toilets at home, but people are also convenient to use and there are some problems that are often encountered in our toilets. Then this thing often appears to friends from time to time. Bring some distress, what is the cause of the splashing of the toilet ? What are the solutions for this toilet when there is splashing water?
First, what are the reasons for the splashing of the toilet?
1. Not only does it have to be like the person inside the house. The reason why the general toilet splashes water is related to the trap of the toilet. According to professional analysis, the toilet trap has two main functions: one is to reduce the adhesion of dirt. The inner wall of the toilet.
2. The second is to block the harmful gas from the sewer into the room through the toilet drain. In order to achieve uniform standards for these two functions, the national sanitary ceramics standard has provisions. The water seal height in the trap must be greater than 50mm, and the water seal area must be greater than 85mm. ×100mm,
3, that is to say, the water that traps the water bends brings infinite "problems" to the water splashing. This is the trap that allows the splashing situation to occur unscrupulously. From the perspective of product design, the design of the toilet bowl falls. The position of the spot will affect the splashing of water, that is to say, the fall of the stool will inevitably arouse the rebound of the toilet surface, but the level of splashing is different.
Second, what are the solutions for toilet splashing?
1, the need to save water, then the storage height is the standard water seal standard is 50 cm, too shallow can not seal the smell, too deep is easy to splash, to choose a toilet that is not easy to splash, choose the water seal height Products between 55 and 60 cm.
2. Understand the angle problem when entering the water. The smaller the slope, the more buffering effect. The less the sewage is splashed, the better the ceramic glaze of the toilet can achieve the purpose of non-staining, so the toilet is very clean. It's easy.
3. The toilet should pay attention to the height. Because the height of the stool is higher, the speed of the water is greater. The momentum when entering the water is also large, and the water splash is serious. After hundreds of tests, the height of the stool is less than 140mm. Very little water splashing, the critical height is 160mm.
4. There is also a kind of foam that can be used in the toilet. Because the foam toilet makes the stool fall, there is no need to worry about splashing and odor. According to the measurement, the toilet can prevent the splash from the height of 1 meter. .
In the future, the toilet used in the house has a problem of splashing water. Everyone is not necessarily nervous. Our Xiaobian has already introduced to the friends about the cause of the splashing of the toilet and the solution after the splash of the toilet. Also want to know more about decoration information, continue to pay attention to our decoration home network.
More related wonderful reading:
How to do toilet water splashing toilet common problems
What are the reasons for splashing water in the toilet? How to solve the toilet splash?
Jumbo Roll Toilet Paper,Jumbo Toilet Paper,Jumbo Toilet Roll,Jumbo Toilet Paper Roll
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupacks.com