The commonly used backpack material introduction (block buckle) [Figure] Read the full text >>
Tensionlock, also called ladder buckle, three-button buckle, four-button buckle. It is also an indispensable part of the backpack. Generally used on a backpack to tighten the webbing. For example, a four-button buckle is generally used at the lower end of the strap. Since the buckle has a self-locking function, the height of the strap can be properly adjusted.
The principle of retaining buttons is the same. The raw material is basically Nylon or Acetal. It is just a little different on the form or self-locking system. Document.write("");ad_dst = ad_dst+1; Here are some of the most commonly used and representative buckles.
1. Evil eye Tensionlock
It can be seen that there are two holes in the head of this buckle, which is the origin of its name. This kind of strong pull force, high elasticity angle and enlarged space facilitate the use of thicker webbing. The lower two holes can pass through a 1/8-inch rope, and can be worn with a glove when wearing gloves.
This kind of buckle is widely used in the connection of straps and flying parts. Some bags of side pull straps also have such buckles.
2. Duckbill Tensionlock
The origin of the name of duckbill buckle is also related to the appearance. The finger-pressing part of this kind of buckle head looks like a duck bill. This design is convenient for loosening the webbing with the thumb.
This clasp has teeth and a strong structure that can withstand heavy loads and prevent the webbing from slipping over the fasteners.
Similarly, duckbill buckles are designed with this kind of perforated retainer button for use when wearing gloves.
A lot of bags, especially leisure bags, use duckbill buckles. Personally, this is considered to be the most widely used type of buckle in casual bags.
3. Standard Tensionlock
When you listen to the name, you will know that this is the most basic standard stopper. The catch on the left is said to withstand 200 pounds. Amazing? The tooth pattern on the middle of it can effectively prevent the webbing from falling off.
The front end of the standard buckle is generally flat, which is the biggest difference with the shape of the duckbill. The buckle on the left is generally only used to adjust the length of the webbing.
4. Mojave Tensionlock
Mohabi should be a self-locking technology. Buckle also has Mohabi's. This buckle has a strong self-locking ability. The picture on the left is a standard mohabi buckle. Its appearance is similar to that of a standard retaining buckle. The Mohabi buckle has a certain degree of curvature, and each block is relatively thick. The combination of high elasticity makes the ribbon release angle even better than other similar products.
For convenience when using gloves, Mohabi buckles also have head-end products with holes.
In addition, the Mohabi buckle also has such a replaceable buckle. This buckle can be easily buckled onto the webbing for easy installation, repair and replacement.
There are many ways you can take to prevent someone stealing your packages. One of the most effective way is the installation and use of a secured parcel box near your door. The parcel box is convenience and security with durable metal material. You can receive packages when you are away with total peace of mind. Parce security box is the perfect choice for home and business.
Wall Mounted Parcel Box,Floor Standing Parcel Box,Large Parcel Box,Small Parcel Box,Flexible Parcel Box
TAISHAN YUEXIN INDUSTRIAL GROUP LIMITED , https://www.gdmetalproducts.com