Output traps and solutions (3)

21. In CorelDRAW 8.0, if you use Chinese fonts in the windows system, such as Songs, Songs, Blacks, and Carcasses, do not print the file information after printing the curve. Otherwise, the PS file cannot be interpreted.
]
22. Using PSD format in CorelDRAW produces very slow image output. Channels or rotations in version 8.0 can cause image defects and bitmaps should be converted in CorelDRAW

23. If you use Grayscale magic TIFF map in CorelDRAW, this Grayscale magic TIFF map will automatically overprint, please convert this Grayscale mode image in Photoshop to CMYK mode and transfer its Grayscale content to K On the channel.

24. Insert barcodes in CorelDRAW 8.0 software and output often 14 colors. There are two ways to solve this problem: 1 Select the bar code copy, press 'Paste Special' to select 'Picture', and change the RGB color to K100. In this way, the bar code is only black. 2 Select the bar code and export the bar code to the AI ​​format. After the import, after adjustment, the bar code automatically changes to K100.

25. Do not use paragraph text in CorelDRAW. Please change it to fine art or to a curve. Otherwise, word dropping may occur.

26. In CorelDRAW, you can use the shading and pattern attached to the software to fill in prison sentences, or as a base map. When using it, please note: 1 Select the appropriate image resolution, usually 1.5 to 2.0 times the output line number, such as resolution Too low will affect the accuracy of the image, too high will affect the output speed. 2 The selected base map should pay attention to whether its attribute is CMYK mode, and the base map shading normally filled is an RGB mode, which should be changed to a four-color mode.

27. If you use CorelDRAW to do business, if there is a large amount of data in the file, there are more graphics in the file. It is better to combine several small versions of the base map into one, reduce the amount of information in the file, increase the output speed, and pay attention to the text. Converting to bitmaps (especially small words), such as converting text to bitmaps will affect the accuracy of the output.

28. In CorelDRAW 6.0, there are two commonly used PANTONE colors: PANTONE? Special Color and PANTONE? Printing Color. The former can be used as a spot color, and the latter will be automatically converted to CMYK mode output when output, instead of being output as a spot color version.

29. In CorelDRAW 6.0 and 8.0, the profile properties in the graphic properties should not be selected as "Proportional to Image" (CorelDRAW 9.0 is called "Contour with Image Scale") otherwise contour line distortion will occur.

30. When CorelDRAW uses the composite color method to print PS files, the “gray-driver bitmap output” option must be set to send color-coded color bitmaps in color, or all color bits in the file, in special shooting in the options. The graph will become a grayscale image; crop marks are output in CMYK, otherwise the corner and symbol word lines will be only black, but this option does not work for spot color versions. If there is a spot color version, customers are required. Draw a corner line and character line or color print PS file; in the node control options to be set to 20000 nodes.