The reason why the suction becomes smaller suddenly when using an industrial vacuum cleaner

The reason why the suction becomes smaller suddenly when using an industrial vacuum cleaner

The reason why the suction force becomes smaller and smaller suddenly when using industrial vacuum cleaners is that the suction force will suddenly become smaller during the use of industrial vacuum cleaners. What causes the suction force to become smaller? Here's a brief introduction for everyone:

1. If we are using a vacuum cleaner, the suction suddenly becomes absent, or there is only a little suction: this time it must be due to foreign matter being clogged in the hose or the air intake of the collection bucket. If we inhale the tape, large pieces of waste paper, cloth strips, small wooden strips, metal strips and other items, these are easily stuck in the hose and air inlet. Then we need to shut down the machine, clean it out of the suction and it will return to normal.

2. When using Ibte Industrial Vacuum Cleaner, especially when cleaning dust, after working for a period of time, it is found that the suction strength becomes weaker and weaker. At this time, the filter or the dust collecting bag should be blocked, and the air flow path is not smooth. , then we need to clean up the dust in the filter and dustbag in time.

3. After we cleaned up the garbage in the machine bucket and restarted the work, we found that the suction details were weakened. This time it should be due to the fact that the bucket was not installed and the position of the host was not installed during the installation of the machine. Completely sealed, the machine should be readjusted.

4. After the industrial vacuum cleaner has been used for a certain period of time, the suction force will be weakened due to aging and peeling of the sealing strip. At this time, we only need to replace the aging sealing strip to allow the suction to return to normal.