TSP offset synthetic paper ink

First, product use, features:

TSP Offset Synthetic Paper Ink is suitable for printing non-absorbent printing substrates such as specialty paper (gold plate paper, silver plate paper and aluminum foil paper) on offset printing and embossing printing machines, and its ink is dry on prints. Fast, good adhesion characteristics.

Second, ink varieties:

(a) ordinary type:

TSP-159 gold light red TSP-819 white

TSP-717 Black TSP-239 Transparent Yellow

TSP-149 Red TSP-019 varnish

TSP-147 Red TSP-139 Magenta

TSP-439 Blue

(B) high adhesion type:

TSP-157 Golden Light TSP-429 Sky Blue

TSP-449 Deep Blue TSP-237 Yellow

TSP-817 White TSP-719 Black

TSP-444 Twilight TSP-137 Magenta

TSP-451 Blue TSP-427 Sky Blue

TSP-238 Yellow

Third, product quality indicators:

Fourth, the use of ink:

Offset Synthetic Paper Ink Under normal circumstances, open the lid can be used without adjustment, in the temperature, temperature or printed substrate and other conditions can take the following remedial measures:

(1) Ink drying is slow, more than 8 hours can be added in the ink TPP-427 red dry oil 0.5-2% can accelerate the ink drying time or add TSP-002 in the printing solution offset printing paper liquid desiccant 0.2-2% .

(2) The ink has poor viscosity and can be added with 1-45 % TSP-161 varnish.

(3) This product has the phenomenon of easy skinning in the printing machine or the ink fountain than the general offset ink. When the machine stops or the temperature is high, the TSP-525 spray can be used to spray the surface of the ink or the ink roller, or in the ink. In the TPP-527 anti-drying agent to adjust the inhibition of ink skinning speed, generally according to the situation within 0.5%.

(4) When using TSP type ink to print large field or human ink patterns, TPP-051 anti-soiling agent can be added to prevent soiling, so that less dusting or dusting will not occur in the printing process. To change the physicochemical properties of the ink, the additive is added to the ink in a weight ratio and the ink is stirred evenly, and the additive can be printed on a printing press. The amount of the additive is 2-5%.

(5) Offset Synthetic Paper Ink The range of water adaptability during printing is small. Pay attention to the adjustment of printing syrup.

(6) The PH value of the printing medicine is controlled at 5-6.

(7) It is best to add 20-30% alcohol to the printing solution to help improve the drying effect of the printed matter.

(8) The amount of printing syrup is adjusted to the minimum allowable amount.

Advise the user:

1, "Tianshi" brand all types of printing inks have excellent features, and have their own characteristics. In view of the printing conditions, post-processing conditions of printing substrates, and the diversity and complexity of the physical and chemical energy requirements of customers for printing products, and the physicochemical parameters of various types of inks are measured under specified conditions, they will be a Changes in conditions change. It is recommended to use after the experiment. Provide data for reference only.

2. If the product is qualified for two years after the product has been maintained for a period of two years, it can still be used after the retention period.