The reason why the vacuum drying box is vacuumed and then heated

The reason why the vacuum drying box is vacuumed and then heated

1) If the heating air is pumped out by the vacuum heating and vacuuming process, the heat will be brought to the vacuum pump, which will cause the vacuum pump to rise too high, which may reduce the efficiency of the vacuum pump.

2) The heated gas is directed to a vacuum gauge, which creates a temperature rise. If the temperature rise exceeds the operating temperature range specified by the vacuum gauge, the vacuum gauge may cause an indication error.

3) The workpiece is placed in a vacuum box to evacuate the vacuum to remove the gas components that can be removed from the workpiece material. If the workpiece is heated first, the gas expands when heated. Due to the excellent sealing of the vacuum box, the enormous pressure generated by the expanding gas may cause the observation window tempered glass to burst. This is a potential danger. This danger can be avoided by the procedure of first vacuuming and then heating up.

The correct method of use should first vacuum and then heat up. After the rated temperature has been reached, if it is found that the degree of vacuum has decreased, then add it appropriately. This is advantageous for extending the life of the device.

真空干燥箱先抽真空再加热的原因

Knife Clip

We can provide you with a variety of colors and production technology of EDC knife clip, such as blue, silver, purple. Knife clip assembly to your knife to make it more convenient to carry, but also can increase your overall fashion temperament. Titanium knife clip has the advantage of ultra-light, some products only 5g, so you don't have to worry about extra weight. At the same time, our knife clip has abundant inventory, support your large order.knife clip

Titanium Knife Clip, Knife Pocket Clip, EDC Knife Clip, Money Clip

BaoJi JiaXin Nonferrous Metal Co., Ltd. , https://www.jiaxin-ti.com