Advantages of the new flocking transfer method

Advantages of the new flocking transfer method

1. The process is simple and does not require technical training. The practice can be successful.

2. Low cost requires only two materials: flock transfer bottom paper and flock transfer special glue. Therefore, most printing factories in Shanghai, Jiangsu, and Zhejiang have used this method to make flocking patterns on clothes.

This new method is also particularly suitable for the processing operations of mortar printing and flocking mixed patterns. If this hybrid pattern can not be produced due to displacement due to the traditional transfer and transfer method, this new direct transfer can only be used. Flocking method.

The operation process is as follows: First, the various colors of glue patterns are printed on the platform board in one set of colors (this is the normal business of the printing factory without pointing), and then printed on the entire printed pattern. Once the anti-adhesive agent, then in the need to flock pattern printed on the site of flocking special glue, to be half dry, the flocking transfer bottom paper put up and press hot, etc. After cooling off the bottom paper. At this point, the flocking transfer special glue pattern part can be seen, and the adhered villi form a very dense flocking pattern, and the printed part with the common glue and the release agent layer also has sporadic fluff stickiness. In the above, but with a piece of paper tape sticking tape, you can stick to these sporadic fluff to make the paste printing pattern is very clean.

Source: China Wash & Dye News