Note for UV curing machine

For the UV curing machine to work normally and smoothly, some precautions must be kept in mind, so as to ensure the safety and efficiency of the work. Here are some things to pay attention to when using the UV curing machine.

Matters needing attention 1, the use of lamps and lamp maintenance. The use of turning on and turning off the UV lamp is particular. 1. When turning on the lights, turn on the lights in sequence. Each light is about 1 minute apart and cannot be turned on at the same time. 2. After turning off the light, the fan should continue to run for a period of time until the lamp cools. 3. If you need to restart after turning off the lights, be sure to wait until the tubes are bent and cooled. 4. It cannot be used immediately after turning on the light. Need to warm up. 5. The lamp should be replaced after using for a certain period of time. 6. After using the UV lamp for a period of time, pay attention to the cleaning of the surface of the lamp tube.

Matters needing attention 2. As the use time of the UV lamp increases, the energy will decay, so pay attention to slow down the speed.

Note three, pay attention to transformers and capacitors. The incoming line of the transformer needs to select the appropriate terminal according to the on-site voltage. After the capacitor is used, it must be discharged if it is repaired. In addition, during the use, do not look directly at the surface of the lamp tube when turning on the lamp.

When using a UV curing machine, you must pay attention to these matters, so as to ensure the safety of the operation and the efficiency of the equipment.

Winter Waterproof Horse Rug is widely used in cold country and areas. We produce 600d, 1200d or 1680d with various padding thickness to meet your market demand.

Winter Waterproof Horse Rug

Winter Waterproof Horse Rug,Waterproof Winter Horse Rug,Waterproof Combo Horse Rug,Winter Horse Blankets

Hebei Honde Group , https://www.horseequipmentfromchina.com