Application of Urethane Hot Melt Adhesive in Book Binding
I. Introduction
Polyurethane (PUR) adhesive refers to a type of adhesive containing urethane groups (-NHCOO-) or isocyanate groups (-NCO-) in the molecular chain. Because -NCO in its molecular chain can react with a variety of active hydrogen-containing functional groups to form interface chemical bonds, it has extremely strong adhesion to various materials, has a tough film, good impact resistance, flexibility, and peel strength High, good low temperature resistance, oil resistance and wear resistance. Hot-melt adhesives (referred to as hot-melt adhesives) are a type of solvent-free solid adhesives based on thermoplastic polymers that melt into a liquid when heated and are applied to the surface of the substrate in the form of a melt for bonding. Hot melt adhesive has the advantages of rapid bonding, non-toxic and non-pollution, energy saving and environmental protection, convenient storage and transportation, low cost, wide application, etc., mainly including EVA, PE, random PP, polyurethane and so on. Polyurethane hot melt adhesives can be divided into two categories: one is reactive hot melt adhesives, which can be divided into terminal isocyanate group prepolymer type (moisture curing type) and blocked isocyanate group prepolymer type (latent curing type) ); The other type is thermoplastic polyurethane elastomer hot melt adhesive, which uses the hydrogen bonding in the composition to crosslink, so that it has excellent elasticity and strength. The former melts when heated and reacts with moisture to cause crosslinking and solidification; while the latter solidifies mainly through the use of hydrogen bonding to physically crosslink. When heated again, it weakens the hydrogen bonding and becomes a viscous liquid, so it can be heated repeatedly-cooling It is solidified and the product can be recycled or reused. It is an environmentally friendly material.
2. Brief introduction of curing mechanism of polyurethane hot melt adhesive
The PUR resin molecular chain has a reactive NCO functional group at the end. Due to the very high carbon-nitrogen double bond activity in this functional group, it will react with air or moisture on the surface of the substrate to form an amine group, and at the same time release C02, the amine group will then Reacts with other NCO groups to form a structure with urea (urea) functional groups. Since there is still active hydrogen in the urea structure, it will further react with the unreacted NCO group to form a biuret structure, completing the so-called cross-linking reaction. Its reaction mechanism with moisture is as follows:
-NCO + H2O → NH2 + CO2 → -NH-CO-NH
-NH-CO-NH- + OCN- → NH-CO-N-CO-NH-
As can be seen from the above, PUR adhesive bonding and curing is a reactive curing method, which is essentially different from the curing of general EVA hot melt adhesives and water-based adhesives. According to the theory of bonding theory, it is believed that there are bonding mechanisms such as mechanical theory, adsorption theory, diffusion theory, electrostatic theory, and chemical bond theory. Relatively speaking, chemical bonding will achieve higher strength than its bonding method. General EVA hot melt adhesives have mechanical, adsorption, diffusion and other bonding theories; while PUR adhesives are more chemical bond theoretical bonding, which reacts with the substrate to form an "inseparable whole", so PUR can be cured after curing Produces excellent bonding strength.
3. The application of hot melt adhesive in book binding and its advantages and disadvantages
1. Application in book binding
With the increasing environmental awareness and health awareness of people today, society no longer only focuses on the function and application of adhesives, the requirements for adhesives' environmental protection are more stringent, and the development of environmental protection that meets the three major requirements of "environmental protection, health and safety" Green adhesive is imperative. People's living standards continue to improve, especially in Europe and the United States, people's pursuit of printed products tend to be fashionable, novel, and personalized, which makes the production process more and more complicated, and the product quality requirements are getting higher and higher. As a new type of adhesive, PUR hot melt adhesive has the characteristics of no solvent volatility, heat and cold resistance, solvent resistance, fatigue resistance and so on. These meet the needs of current social development.
In the printing and packaging industry, PUR hot melt adhesives are used in book binding, plastic-plastic printing, paper-plastic lamination, and plastic box manufacturing. PUR hot melt adhesive is a PUR prepolymer with active terminal groups. For printed paper, when the active terminal groups are exposed to humid air or the paper reaches a certain humidity, a cross-linking reaction will occur. After being wetted, the prepolymer can penetrate into the paper well and cross-link with the fiber molecules in the paper to achieve higher viscosity and higher paper tension. In the past 20 years, thanks to the development of wireless binding technology, the application of hot melt adhesives in book binding has achieved rapid development. EVA hot melt adhesive has good adhesiveness and elasticity. At present, most book binding hot melt adhesives on the domestic market are EVA type hot melt adhesives. However, EVA hot melt adhesive is expensive and has shortcomings such as memory, so it tends to close when you want to open the book, and tends to open when you want to close it, and when the book is read, a groove is formed in the binding place or the book suddenly closes on. The production process of polyurethane hot melt adhesive is simple and the cost is low, which can make up for the above defects. The adhesive has good elasticity and toughness, high bonding strength, the adhesive can be melted and used repeatedly, the product utilization rate is high, and it has broad application prospects.
2. Main application advantages
In book binding applications, compared with traditional EVA hot melt adhesives, PUR hot melt adhesives have fast curing, easy to use, lower sizing temperature, impact resistance and fatigue resistance, good flatness, durability, strong adhesion, Environmental protection and other advantages.
For book binding after printing, PUR hot melt adhesive can reach the strength of ordinary EVA hot melt adhesive binding after 6 hours, and the strongest bonding effect can be achieved after 48 hours. Paper coating and ink, varnish coating, UV curing layer, plastic film and other materials with large differences in surface properties will not greatly affect the binding properties of PUR hot melt adhesives. Compared with traditional EVA adhesives, The results of functional tests of finished products (such as book pull and pull pages test) will be more than 60% higher. The traditional EVA hot melt adhesive book binding sizing temperature is about 160-180 ℃, PUR hot melt adhesive sizing temperature is relatively low, only 120-150 ℃, is very suitable for high? 创 舾 å° â’ Make-up and noisy Scratch Ï„ é¤? The tip of the pinch is more and more confusing to send the xiong die? ⑶ Iridium a little bit and said Mou Tongdi stepped on? Bath 6 Miscellaneous ran to wash the steps of the fence? Car? VA hot melt glue needs to be processed on the book, The PUR hot melt adhesive can reduce this process, save costs and shorten the production lead time. The PUR hot melt adhesive layer is soft, which makes it easy to read and fold the book. As a network cross-linking compound, it exhibits excellent resistance to shock, vibration and fatigue. For some long-term books such as reference books, manuals, PUR hot-melt glue binding is undoubtedly the best choice for the flatness of books required for teaching books, cooking books, etc. (the degree to which the books are opened). Due to the chemical cross-linking reaction of PUR hot melt adhesive, it has high heat resistance, low temperature resistance, solvent resistance, water resistance and other excellent adhesion properties. For some long-term preserved books such as photobooks, photo yearbooks, high-end cultural relics Calligraphy and painting, Bible books, etc., PUR hot melt adhesive can fully meet the requirements of these books. PUR hot-melt adhesive has excellent adhesion, and the amount of adhesive used is about 50% or less than that of traditional EVA hot-melt adhesive. EVA hot melt adhesive should reach a certain strength (the thickness of the back of the book according to the paper and the thickness of the book). The adhesive layer should be controlled between 0.6 and 2 mm. Under the same circumstances, the PUR adhesive layer can be used regardless of book thickness or paper size. Generally, it can reach the same strength as EVA hot melt adhesive at about 0.3 mm. The composition of PUR hot melt adhesive contains no solvent, and the curing process will not cause pollution of volatile solvents, which is the future development goal of environmentally friendly adhesives.
Plastic cup,small and colour cup ,portable cup,cheap cup
Bossgoo Wedding Company Co., Ltd. , https://www.bossgoodemo.com