A clever trick to remove the sticker
Guide: The fragile labels of self-adhesives are generally attached to machines, computers, metals, plastics, etc. for anti-counterfeiting labels or warranty labels. It is often not easy for people to want to tear off the label, because it is an anti-counterfeit label, and it will stick to any sticker.
Here are a few ways to help you: how to remove fragile stickers. Although self-adhesive labels are a very good label, they sometimes cause trouble to people. For example, if you buy a new kitchen utensil or sanitary ware, you need to remove the self-adhesive label. If it is very unsightly, use a label and it is also a problem. However, self-adhesive labels are more difficult to remove. If the cleaning is not clean, a sticky layer of glue will remain on the items. After a long time, the dirty things will stick and the items will not look clean. In fact, not only kitchen utensils and sanitary ware have such problems, other things like plastic products, glass products, ceramics, etc., most of them are covered with stickers, although the surface can be removed, but The sticky glue on the bottom layer is hard to clean.
Tool material
Needle or toothpick, eraser, hair dryer, lemon juice, hand cream, hot water, vinegar and oil, scissors, nail polish, alcohol, wind oil, etc.
Step / method
1, metal needle removal method: you need to prepare a metal needle or toothpick (the finer the better), and another rubber. Pay attention to gently picking up from one end (be careful not to use force in the direction of the object, be sure to apply force outward). This makes it possible to pick up the area of ​​the big point at once (don't let the dropped label fall on other things, or it becomes secondary pollution). When there is different strength, there will be residual glue. At this time, use a rubber to gently wipe it (note the position where the rubber scorpion is dropped).
2. Eraser: For some traces of residual adhesive on the surface, you can also erase the eraser and remove the hair left by the eraser.
3, direct trim: If there is stubborn self-adhesive on the carpet, then you can carefully trim the traces of the top of the carpet fluff directly, it will not affect the quality of the carpet.
4, hair dryer: For the plastic products above the stickers, you can use the hot file of the hair dryer to blow the adhesive, and then slowly tear off. However, almost every family has a hair dryer, and a hair dryer can also solve the annoying label. Use the hot air of the hair dryer to blow the label, but keep it at a certain distance, don't be too close, and don't keep blowing for a long time. When you touch the label with your hand and it is slightly hot, you can use your nails or tips to pick up a little bit from the corner of the label. Since the adhesive will become sticky when it is heated, it is better to tear it than when it is dry. However, it is not the addition of heat, it turns from glue to water, and the viscosity is still there. When tearing, it should not be too fast and too fierce. Be careful and patience. It is best to expose the face at a 45 degree angle to the original pasted surface. "Get up, not yank and tear." As long as you have patience, the label can be torn off intact without leaving a little offset on the box.
5, hot water: the traces of the residue first use hot water to soak the towel, then wipe repeatedly on the traces of self-adhesive, then damp the wet towel with soap, wipe repeatedly at the trace, and finally use a clean warm towel The soap can be wiped clean.
6, lemon juice: If these stickers get on the skin, you can use lemon juice to remove.
7, hand cream: hand cream can also achieve the effect of removing the adhesive, because the hand cream contains a lot of water, and the water contains a certain amount of surfactant. This surfactant has good ability to wet, penetrate and dissolve, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of cleaning. Some similar products, such as creams, facial cleansers and washing spirits, also have a certain effect.
8, the consumption of vinegar vinegar removal: we smear the vinegar with a cotton swab evenly on the adhesive. Through the glass, we can immediately see the vinegar slowly spread between the glass and the sticker. At this time, use a cotton swab to scrape back and forth on the adhesive. After a while, the adhesive will peel off and peel off, and the residual component of the self-adhesive on the glass is very small. New.
9, edible oil removal method: spare a spoonful of cooking oil, and then evenly applied to the labeling place (fragile label will lose its viscosity under the action of oil). After 3~5 minutes, you can slowly tear it off from the corner of the label by hand, so that no label marks will be left.
10. Washing water removal method: wash nail water, treat the traces of adhesive on the surface of hard objects, such as stainless steel pots or glassware, apply a small amount of water on the whole fragile label, and gently scrape off with nails. label. Then use a cotton swab to apply a small amount of nail polish to the residue of the label. After 1~2 minutes, gently remove the residual glue and it will fall off. These methods do not damage the sticker and can remove the sticker. We can also peel off the label and apply it to the surface of the object with grease-free nail polish, then wipe gently with a soft cloth.
11. Alcohol removal method: The effects of the above solvents are not obvious. After applying the solvent, we also need to forcefully remove the residue on the glass. But when alcohol was used, things changed immediately. We brushed the adhesive on the glass with alcohol and immediately saw that the adhesive slowly softened and dissolved. Gently peeling off the glass with a hand and leaving the glass clean. These marks can also be removed with gasoline.
12, wind oil fine removal: remove the stubborn stains left by the self-adhesive label, wind oil essence is the most useful. Wind oil essence is very effective for removing the self-adhesive glue, and the wind oil essence is soaked with the self-adhesive trace. Slowly, we felt that the adhesive was soft and some of the stickers had been scraped. As we continually smeared and smeared, the reaction between the two became faster and faster. About 2 minutes later, a piece of self-adhesive was cleaned up. Then wipe it with a clean cotton cloth and peel off without the adhesive.
Dongguan Mingpin Traveling Appliance Company , https://www.mpluggage.com