What's wrong with tap water?
Many people will encounter this situation. The newly purchased faucet has just started to use very smoothly, but after a few months the water is getting smaller and smaller. What are the reasons? Let's explore it today.
The tap water is small for the following reasons:
1. Filter clogging: Some faucet manufacturers in the design of the filter to prevent the installation of sand, after the accumulation of time, there may be dirt blocking the filter, this situation can be opened to open the faucet interface to see, clean Take a look at the filter.
2. The water pressure is too small: If the floor of the residence is high, the water pressure may be insufficient, leading to insufficient water pressure and a low water supply. In this case, the property must be contacted to communicate with the Water Supply Bureau.
3. The water valve is turned off: If someone closes the valve, there will be less water. There is also a problem with the valve.
4. The amount of water in the home is large: In a large number of rooms, a lot of water is used at the same time. The amount of water will be diverted, and the water will certainly be reduced.
5. Problems with the faucet: Check if the water in other places is normal. If it is normal then confirm the problem of the faucet.
6. Water pipe plugging: If the water pipe is blocked, do not tamper with the water pipe. Ask a professional to handle it.
7. Bubbler plugging: Many people only pay attention to the surface of the faucet when cleaning the faucet, but actually the inside of the faucet is more important. If the amount of tap water is reduced or the water fork is produced, it may be due to a clogged bubbler. Remove the bubbler and soak it in vinegar. Use a small brush or other tool to clean the debris and reinstall it.
<\p><\div>
Automatic Sensor Sanitizer Dispenser
We are the company specializing in manufacturing hotel supplies. Main products are hand push soap dispensers, automatic Sanitizer Dispensers, paper dispensers, hand dryers, hair dryers, Trash Bins, etc. Most of our products have certificates like CE, UL, GS, ROHS. With moulding workshop in house and experience techinicians, we accept OEM ODM products.
wall mount dispensers,standing dispensers,table top dispensers,Foam Soap Dispenser
TAISHAN YUEXIN INDUSTRIAL GROUP LIMITED , https://www.gdmetalproducts.com